Each line has one job. Management owns risk, specialist teams support and challenge it, and internal audit gives the board independent assurance.
The 2026 update is about coordination. The IIA kept the structure, but put assurance and advice, independence and coordination at the centre, with internal audit as the integrator of assurance.
An assurance map makes the lines work together. It shows the board, on one page, where assurance is missing and where it is duplicated.
Last year, four separate reviews looked at the same month-end reconciliation. Finance signed it off, the financial control team reviewed it, internal audit tested it, and external audit tested it again. Nobody looked at the critical supplier whose failure would have stopped deliveries for a month.
That is what the three lines of defence look like when nobody connects them. Each line did its job. Together, they gave the board a confident answer to the wrong question.
The three lines of defence model exists to prevent exactly that. It splits responsibility for risk between the people who manage it, the specialists who support and challenge them, and the internal auditors who give independent assurance. You will also see it written as the three lines of defense model, or shortened to 3LoD.
In July 2026, the Institute of Internal Auditors (IIA) updated the model again. UK boards also face a new test: they must now declare whether their material controls work. This guide explains what each line does, what changed, where the model breaks down, and how to make it work with an assurance map. A free template is included.
What Is the Three Lines of Defence Model?
In risk management, the three lines of defence model divides responsibility so that every risk has an owner, a challenger and an independent check. The first line owns and manages risk. The second line provides specialist support and challenge. The third line, internal audit, gives the board independent assurance that the whole system works.
FERMA and ECIIA built the model into their 2010 guidance for boards and audit committees on monitoring internal control. The IIA formalised it in a 2013 position paper, which made it the international reference point for organisations of every kind.
In 2020, the IIA dropped the word “defence” and renamed it the Three Lines Model. The change was deliberate. Organisations take risk to create value, not only to avoid loss. In July 2026, the IIA replaced the 2020 paper with a Statement of Position, Assurance and Advice in Support of Effective Governance. The core structure stayed the same.
Most practitioners still say “three lines of defence”. This guide uses both names.
How the lines connect
Each line answers to the board, and all three coordinate through one assurance map. External providers give assurance from outside the model. Adapted from the IIA's Three Lines Model (2026).
The Three Lines of Defence Explained
Each of the three lines of defence has a distinct job. The IIA separates them by three things: how close they are to operations, how much specialist expertise they hold, and how independent they are. No single line can maximise all three, which is why you need all of them.
First Line of Defence: Management
The first line is management: the people who run operations and own the risks that come with them. They design, implement and operate processes and controls. They supervise activity, monitor performance and run control self-assessments.
Their strength is proximity. They see problems first and can fix them fastest. Their weakness is objectivity. People who own a process can miss its weaknesses, and management can override some controls.
In practice, this is the site supervisor running daily safety checks, or the finance team signing off month-end reconciliations. Tracking key risk indicators is first-line work.
Second Line of Defence: Specialist Support and Challenge
The second line is made up of specialist roles: risk management, compliance, safety, quality and environment. They provide expertise, support, monitoring and challenge. They often run thematic reviews in their own areas.
The second line is not a police force. Its job is to help the first line manage risk well, and to challenge it when it does not. It is more objective than the first line because it sits apart from operations. But it usually still reports through management, and that can limit how hard it pushes.
The 2026 update notes that organisations with complex operations, significant regulatory obligations or fast-changing risks often need a more developed second line. A dedicated compliance management function is a common example.
Third Line of Defence: Internal Audit
The third line is internal audit. It gives independent, objective assurance on governance, risk management, compliance and control, including over the first and second lines. It also gives advice, without taking on management responsibility.
Its independence comes from structure. Internal audit typically reports functionally to the board and administratively to the chief executive. It sets its own scope, has unrestricted access to information, and can report without interference.
The 2026 update reaffirms internal audit’s role as the integrator of assurance. Because it sees the whole organisation, it is best placed to connect the work of all three lines into one view for the board. Its limit is coverage. Audit work is risk-based and periodic, so lower-risk areas can go years between reviews. Good audit management keeps that coverage visible.
The Board and External Assurance Providers
The board sits above the three lines. It sets purpose and risk appetite, defines accountability and oversees all three. It is not a line itself.
External auditors and regulators also give assurance, but from outside the model. External audit serves shareholders and other outside stakeholders. Regulators enforce rules. Both provide useful evidence, but neither replaces internal assurance.
From Three Lines of Defence to the IIA’s Three Lines Model
The model has changed twice since the IIA’s 2013 paper. Each change kept the three lines and sharpened how they work together.
The 2020 update moved the model away from defence. It became principles-based, built around six principles, and focused on creating and protecting value. It placed the first and second lines together under management. It also described internal audit as giving advice as well as assurance.
The July 2026 Statement of Position keeps that structure and adds detail where organisations struggled. Five changes matter most:
- Five principles replace six. They centre on the board’s need for reliable, balanced information, and on distinct sources of assurance, including at least one independent source.
- Assurance and advice are distinct but complementary. All three lines can give both, with safeguards, and advice must never become a management decision.
- Independence is defined in practical terms. It means the right reporting lines, control over scope, unrestricted access, enough resources and protection from retaliation. The IIA also suggests at least 12 months between running a process and giving assurance over it.
- Coordination comes first. The IIA names the assurance map as a useful tool for coordination, warns against “assurance fatigue” from overlapping reviews, and reaffirms internal audit as the integrator of assurance.
- Real structures get real guidance. Many organisations do not have three separate lines, and the update sets out the safeguards needed when internal audit does second-line work, or when the head of internal audit also supervises a compliance function.
| 2013 paper | 2020 update | July 2026 Statement of Position | |
|---|---|---|---|
| Name | Three Lines of Defense | Three Lines Model | Three Lines Model |
| Focus | Defence and control | Principles-based governance, creating and protecting value | Assurance and advice, independence, coordination |
| Principles | None set out | Six | Five |
| Internal audit role | Independent assurance | Independent assurance and advice | Independent assurance and advice, and integrator of assurance |
| New guidance | None | Collaboration across the lines | Blended roles and safeguards, a 12-month gap before assuring a process you ran, the assurance map, assurance fatigue |
If your framework still describes the 2013 model, the structure holds. The language, and the expectations on coordination, have moved on.
Where the Three Lines of Defence Break Down
The three lines of defence model is simple on paper. In practice, the same five problems come up again and again.
- The first and second lines blur. Risk teams end up owning risks or operating controls, because the business hands them over. Fix: write down who owns, who operates and who challenges each key control.
- The second line polices instead of supporting. Risk becomes a box-ticking exercise and the business stops engaging. Fix: judge the second line on the decisions it improves, not the number of findings it raises.
- Internal audit does second-line work. It designs a framework, then audits it, which is a self-review threat. Fix: follow the 2026 safeguards. Document the arrangement, tell the board, and have another party give assurance over that area.
- Assurance overlaps and leaves gaps. Several teams test the same financial control, while nobody looks at a critical supplier. Fix: build an assurance map.
- Each line works in its own system. Risk registers, control tests and audit findings sit in separate spreadsheets, so the board gets three partial pictures. Fix: connect them in one record.
Not sure where your organisation stands? Start with a risk maturity assessment.
Each line did its job. Nobody connected them.
How to Build an Assurance Map in Seven Steps
An assurance map is the tool that makes the three lines of defence work together. The IIA describes it as a high-level document that shows which assurance providers cover which risks across the organisation, so that gaps and duplication become visible.
- List your objectives and principal risks. Start from what the organisation is trying to achieve, and use a well-kept risk register as the starting point.
- Identify the key controls for each risk. For UK listed companies, these include the material controls the board must declare on under Provision 29.
- Record who gives assurance over each control, line by line. Include external providers such as external audit and regulators.
- Rate each source of assurance. Consider how often it happens and how deep it goes, and how well the control has performed when tested.
- Find the gaps and the duplication. Look for risks with no internal audit assurance, and for controls tested by several teams.
- Agree one coordinated assurance plan. Close the gaps, remove the duplication, and decide where one line can rely on another’s work.
- Report the result to the board on one page.
Assurance Map Example
Here is an illustrative map for a mid-sized organisation that operates under a licence.
| Principal risk | Key control | First line | Second line | Third line | External | Verdict |
|---|---|---|---|---|---|---|
| Critical safety control failure | Isolation and lockout procedure | Supervisor daily checks | Safety team field checks, monthly | Internal audit review, every two years | Regulator inspection | Adequate |
| Critical asset failure | Planned maintenance programme | Maintenance supervisors, weekly | Asset management team review, quarterly | No audit in three years | Independent engineer inspection, annual | Gap at third line |
| Material misstatement | Month-end reconciliations | Finance sign-off, monthly | Financial control team review | Internal audit, annual | External audit | Duplication: all four providers test one control |
| Breach of licence conditions | Obligations register and attestations | Owners attest, quarterly | Compliance monitoring | None | Regulator | Gap at third line |
| Critical supplier failure | Supplier due diligence | Procurement checks at onboarding | None | Internal audit, planned next year | None | Gaps at second and third lines |
The board learns three things from this one table. Three risks have no internal audit assurance: critical asset failure, licence compliance and critical supplier failure. Supplier failure also has no second-line oversight. Month-end reconciliations are tested by all four providers.
The fix is a coordinated plan. Add asset maintenance, licence compliance and supplier risk to next year’s audit plan. Give supplier risk a second-line owner. Let internal audit rely on the financial control team’s review where its quality is proven, and free that time for the gaps.
Assurance Map Template
Download the free assurance map template. It includes these columns, a rating key, a verdict that flags gaps and duplication automatically, a one-page board summary and this worked example.
Reporting the Three Lines to the Board
Boards do not need every control. They need to know whether the system works, where it does not, and what is being done about it. One page covers it:
- Coverage shows which principal risks have internal audit assurance, and which do not.
- Gaps and duplication come straight from the assurance map.
- Results set out what each line found, in plain language.
- Actions say who will close each gap, and by when.
For more on format, see our guide to what directors actually need to see in a risk report.
In the UK: Provision 29
Provision 29 of the UK Corporate Governance Code asks boards to declare whether their material controls were effective at the balance sheet date. It applies to financial years beginning on or after 1 January 2026, so the first declarations appear in 2027 annual reports.
In its Provision 29 Mythbuster, the FRC reports that most companies it has engaged with have identified between 30 and 50 material controls, while stressing that there is no target number. It expects the report to run to no more than two pages in most cases. A working three lines model and an assurance map are the evidence behind that declaration, as our guide to balancing risk, control and assurance under the UK Corporate Governance Code explains.
In Australia: the Commonwealth Risk Management Policy
Australian Commonwealth entities work within the Commonwealth Risk Management Policy. According to the Australian National Audit Office, its nine elements include clearly defined responsibilities for managing risk and assessing the effectiveness of controls: the three lines in all but name.
How Technology Connects the Three Lines
The three lines of defence fail most often at the joins. When management tracks controls in one spreadsheet, the risk team in another and internal audit in a third, nobody sees the whole picture.
Technology should fix the joins, not blur the roles. Each line keeps its own job but works from one connected record of objectives, risks, controls and evidence.
That is how Clew works. It connects objectives, risks, controls and assurance in one system. Management runs control testing and attestations. Specialist teams assess control effectiveness. Internal audit records control verifications and findings. Each line keeps its role, and the board sees one picture. See how Clew’s risk management software supports all three lines.
Frequently Asked Questions
What are the three lines of defence?
The three lines of defence is a framework for dividing responsibility for risk. Management owns and manages risk (the first line). Specialist functions such as risk and compliance support and challenge it (the second line). Internal audit gives independent assurance (the third line). The board oversees all three.
Who is the second line of defence?
Specialist roles such as risk management, compliance, safety, quality and environment. They give the first line expertise, support, monitoring and challenge. They sit apart from operations but usually report through management.
Is internal audit the third line of defence?
Yes. Internal audit gives independent, objective assurance and advice on governance, risk management, compliance and control. It reports functionally to the board. External auditors and regulators give assurance from outside the three lines.
What is the difference between the three lines of defence and the Three Lines Model?
They describe the same structure. The IIA renamed the model in 2020 and dropped the word “defence”, because organisations take risk to create value, not only to avoid loss. Most practitioners still use the older name.
What changed in the IIA's 2026 update?
The July 2026 Statement of Position keeps the core structure. It sets out five principles, separates assurance from advice, defines independence in practical terms and reaffirms internal audit as the integrator of assurance. It also adds guidance for organisations without three separate lines.
What is an assurance map?
A high-level view of which assurance providers cover which risks across the organisation. It shows where assurance is missing and where it is duplicated, so the three lines can coordinate their work and give the board one picture.
Does the model work for smaller organisations?
Yes. The model is principles-based, and the 2026 update accepts that structures vary. Where one team covers more than one line, it recommends safeguards: documented responsibilities, board approval and independent review of the overlap.
How do the three lines of defence work in the public sector?
Public bodies apply the same structure. Management owns risk, specialist teams such as risk, compliance and safety support and challenge, and internal audit reports to an audit and risk committee. Commonwealth entities in Australia work within the Commonwealth Risk Management Policy, and UK central government bodies work to HM Treasury’s Orange Book.
Put Your Three Lines on One Map
Clew is a risk and assurance platform built around the Golden Thread: the traceable link from an organisation’s objectives through its risks, controls, actions and assurance to the indicators that show whether it is performing. Each line works from the same record, so the board sees one picture of assurance instead of three partial ones. Risk and assurance teams in government, healthcare, construction, infrastructure and utilities, mining and resources, and transport use Clew to keep their risks, controls and indicators connected to the objectives they protect. Start with the free assurance map template. Then see it working with your own risks: request a demo of Clew, or explore Clew’s risk management software.
Sources
- The Institute of Internal Auditors, Assurance and Advice in Support of Effective Governance: Three Lines Model, Statement of Position (July 2026)
- Financial Reporting Council, Provision 29 Mythbuster (January 2026)
- FERMA and ECIIA, Guidance on the 8th EU Company Law Directive, article 41, for boards and audit committees (September 2010)
- The Institute of Internal Auditors, The Three Lines of Defense in Effective Risk Management and Control, Position Paper (January 2013), via the Chartered IIA
- Australian National Audit Office, Insights: Risk Management
Related Resources
- What directors actually need to see in a risk report covers the one-page board view.
- Balancing risk, control and assurance under the UK Corporate Governance Code explains what the Code asks of boards.
- The Clew risk maturity assessment shows where your organisation stands today.
- Audit management software shows how Clew supports the third line.

