Opens in a new tab
How mature is your risk management?
Take the Free AssessmentTake Assessment

Risk Management

Risk Appetite Statement: Examples, a Template and How to Write One

Keith Ricketts-Clew-GRC

Keith Ricketts

November 10, 2026
Time to read: 11 minutes

Summarize this article with:

ClaudeChatGPTGoogle GeminiPerplexityGrok
4
elements a risk appetite statement typically contains according to Comcover
6
steps to write one that guides real decisions
3
links in the chain: appetite, tolerance and indicator
Didn't have time to read - TL;DR
3 key takeaways
1

A statement has to decide something. “Low appetite for financial risk” tells nobody whether to approve the next contract variation, so every category needs a tolerance and a measure.

2

Appetite sets the tone; tolerance sets the line. Appetite is the overall attitude to risk, and tolerance turns it into boundaries someone can monitor.

3

Write it once, then use it every week. Calibrate the risk matrix to it, report exposure against it, and review it at least once a year.

An executive is asked to approve a contract variation. The project is running late, and the variation buys back six weeks at a cost of $1.2 million. The risk section of the paper says the change is within appetite. The executive asks how anyone knows.

The answer should be in the organisation’s risk appetite statement. It says the organisation has a low appetite for financial risk and a moderate appetite for schedule risk. It does not say how much money, how many weeks, or who decides. So the paper’s claim cannot be checked, and the decision is made on instinct, exactly as it would have been without a statement at all.

That is the most common problem, and it is rarely that the statement is missing. It is that it was written to be approved rather than used. This guide covers what a statement is, what goes in it, two worked examples, a template you can copy, and six steps to write one people can actually decide against.

What Is a Risk Appetite Statement?

A risk appetite statement is a short document, approved by the board or executive, that sets out how much risk an organisation is willing to accept in pursuit of its objectives, and the boundaries within which people can take risk on its behalf. It combines an overall statement of appetite with tolerance statements for each category of risk, ideally backed by measures that can be monitored.

Comcover’s information sheet on risk appetite and tolerance defines appetite as the amount of risk an entity is willing to accept or retain to achieve its objectives. It treats tolerance as the practical application of that appetite to a specific objective or category of risk. Those two ideas are the backbone of any good statement.

Risk Appetite vs Risk Tolerance

The two terms are often used interchangeably, and they should not be. Appetite sets the tone: it is a qualitative statement of attitude. Tolerance sets the line: it applies that attitude to one category of risk and, where possible, expresses it as a measure someone can monitor. Comcover makes the same distinction, describing tolerance as the step that turns appetite statements into quantitative measures. For a fuller treatment, see how risk appetite differs from risk tolerance.

Key distinction

Appetite is how much risk you are willing to take. Tolerance is how far you will let a specific risk go before someone has to act.

What Goes in the Statement

Comcover describes a risk appetite statement as a short document that typically has four elements.

  • It opens with a clear endorsement from the senior executive or board, so people know it carries authority.
  • It explains what the statement is and how it is to be used.
  • It sets out the organisation’s overall attitude to taking and accepting risk.
  • It gives a series of tolerance statements, usually by risk category, with the conditions, caveats and limits that apply to each.

Larger and more complex organisations tend to add more detail and more quantitative measures. Smaller ones can stop at a page or two. What matters is that the tolerance statements are specific enough to decide against.

Risk Appetite Statement Examples

Published statements are easy to find. Councils, research bodies and charities in Australia put theirs online, and most follow the same pattern: an overall statement, a table of categories and an appetite level for each. Where they fall short is the step after that. Few say what happens when a tolerance is reached, or how anyone would know.

The two examples below go one step further, carrying every category through to a tolerance and a measure. They are illustrative, written for this guide, and not taken from any organisation.

Example 1: A public agency

Overall statement: the agency accepts moderate risk to improve how services are delivered, provided the safety of staff and the public, the integrity of public money and compliance with the law are not compromised.

CategoryAppetiteTolerance statementMeasure and threshold
Safety of staff and the publicLowWe will not accept risks that could reasonably lead to serious harm.Serious incidents: none tolerated, and any serious incident reported to the executive within 24 hours
ComplianceLowWe will not knowingly breach legislation or policy.Overdue compliance actions: none older than 30 days
Service deliveryModerateWe accept short-term disruption to trial better ways of working.Service availability above 98% each month, with anything below 95% escalated
FinancialLowWe will manage within approved budgets and protect public money.Forecast variance within 2% of budget, with more than 5% reported to the audit and risk committee
ReputationLowWe will avoid actions that would undermine public trust.Substantiated complaints each quarter within the agreed baseline

Example 2: A construction business

Overall statement: the business accepts moderate commercial risk to win and deliver profitable work, and has no appetite for risks that could seriously harm people on its sites.

CategoryAppetiteTolerance statementMeasure and threshold
Health and safetyLowWe will not tolerate risks that could cause a fatality or serious injury.Critical control verifications completed on time at 95% or above, with anything below 90% escalated within 24 hours
CommercialModerateWe will bid for complex work where the margin justifies the risk.Any project forecasting a margin more than 3 points below bid escalated to the executive
DeliveryModerateWe accept programme risk on complex projects, within agreed float.Critical-path activities more than five working days late kept under 5%
EnvironmentalLowWe will operate within every permit and licence condition.No licence breaches, and every near breach investigated
WorkforceModerateWe will grow using subcontractors without diluting competence.Subcontractor competence checks completed before mobilisation: 100%

Notice what the measures do. Each one tells a manager, before the risk lands, whether they are inside the line. That is the job a key risk indicator does, covered in more detail in key risk indicators.

A statement nobody can decide against is a values statement with a risk heading.

How to Write a Risk Appetite Statement

Six steps take you from a blank page to a statement people use.

1. Start from objectives and risk categories

Begin with what the organisation is trying to achieve, then agree the categories of risk that could stop it. Safety, compliance, financial, service delivery, reputation, people and strategic change are common. Use the categories already in your risk register, so the statement and the register speak the same language.

2. Write the overall statement

Keep it to one or two sentences that set the tone: where the organisation is willing to take risk to achieve its objectives, and where it is not. Test it by asking whether a new manager would know, after reading it, what the organisation most wants to protect.

3. Set an appetite level for each category

Use a defined scale, with a short description of each level, so that “moderate” means the same thing in every part of the organisation. Three levels (low, moderate and high) are enough for most organisations, and larger ones sometimes use five.

For UK public bodies: the Orange Book scale

Many UK public bodies use a five-level scale (averse, minimal, cautious, open and eager) from the Government Finance Function's Risk Appetite Guidance Note. On 29 July 2026, GOV.UK removed that note from the Orange Book collection as out of date. The scale is still widely used, but check the Risk Centre of Excellence's current guidance on OneFinance before building on it.

The change is recorded on the Orange Book page on GOV.UK, which now points public sector staff to OneFinance for current risk guidance.

4. Turn each level into a tolerance statement

For each category, write what the level means in practice: what the organisation will and will not accept, and the conditions, caveats and limits that apply. Comcover suggests presenting these in a table, from very low to very high tolerance. Write each one so that a manager could tell whether a proposal falls inside it.

5. Attach a measure and thresholds to each tolerance

Where you can, express each tolerance as a measure with thresholds: a level that is normal, a level that needs a look and a level that needs a decision. Not every category can be measured precisely, and reputation rarely can, but most can be measured well enough. These measures become your key risk indicators.

6. Endorse, communicate and review

Take the statement to the board or executive for endorsement, then build it into how decisions are made: project approvals, investment papers and the risk register. Review it at least once a year, and whenever strategy or the operating environment changes.

Risk Appetite Statement Template

Copy this structure and fill it in. Keep the whole statement to two or three pages if you can.

  • Endorsement: one line from the board or chief executive confirming they approved the statement and expect it to be used.
  • Purpose: one paragraph on what the statement is for and where it applies, such as approvals, investment decisions and risk reporting.
  • Overall statement: one or two sentences on where the organisation will and will not take risk to achieve its objectives.
  • Review: the date of the next review and who owns it.

Then add one row per category to the tolerance table.

CategoryAppetiteTolerance statementMeasure and thresholdsOwner
SafetyLow, moderate or highWhat you will and will not accept, with any conditionsThe measure, plus its normal, look and decide levelsName or role
FinancialLow, moderate or highWhat you will and will not accept, with any conditionsThe measure, plus its normal, look and decide levelsName or role
Add a categoryLow, moderate or highWhat you will and will not accept, with any conditionsThe measure, plus its normal, look and decide levelsName or role

Making the Statement Work in Decisions and Reporting

A statement earns its keep in three places.

  • In the risk matrix, because Comcover points out that likelihood and consequence tables should be calibrated to appetite, or the ratings they produce will drive responses that are too light or too heavy.
  • In decisions, because every approval paper with a risk section should say which tolerance applies, whether the proposal sits inside it, and which measure shows it.
  • In reporting, because a board that sees which categories are near their line, and why, can act before the line is crossed. For what that looks like on a page, see what directors actually need to see in a risk report.

Keeping all of this in step is hard in documents. Tolerances live in one file, indicators in another and the risk register in a third, and they drift apart between reviews. Purpose-built risk management software keeps them together, with configurable dashboards and board-level reports drawn from current data.

Appetite sets the tone. Tolerance sets the line. A measure tells you where you stand.

Common Mistakes to Avoid

  • Every category is set to low. A statement with no appetite anywhere tells people to avoid all risk, including the risks the strategy depends on.
  • Nobody can measure the tolerances. “Low appetite for reputational risk” with no measure or example gives managers nothing to decide against.
  • The examples were copied from another industry. Measures written for a different kind of organisation rarely translate to a council, a construction business or a mine, so write measures from your own operations.
  • The statement lives in a policy folder. If approval papers and risk reports never refer to it, it is not being used.
  • Nobody reviews it. Strategy changes, so appetite should too, and a statement that is three years old describes a different organisation.

Each of these breaks the same chain. A risk appetite statement is where the traceable link from an organisation’s objectives through its risks, controls, actions and assurance to the indicators that show whether it is performing begins. If the statement is vague, nothing further down the chain has anything to be measured against.

Frequently Asked Questions

A risk appetite statement is a short document, approved by the board or executive, that sets out how much risk an organisation is willing to accept to achieve its objectives. It usually combines an overall statement with tolerance statements for each category of risk, ideally with measures that can be monitored.

Start from your objectives and risk categories, and write a short overall statement. Set an appetite level for each category on a defined scale, and turn each level into a tolerance statement with a measure and thresholds where you can. Then have it endorsed, communicate it, and review it at least once a year.

Risk appetite is the overall amount of risk an organisation is willing to accept to achieve its objectives. Risk tolerance applies that appetite to a specific objective or category of risk, ideally as a measure that can be monitored, so people know when a risk is nearing an unacceptable level.

Comcover suggests four elements: an endorsement from the senior executive, an explanation of what the statement is and how it is used, the overall attitude to risk, and tolerance statements by category with their conditions and limits. Many organisations also add measures and thresholds for each tolerance.

At least once a year, and whenever the organisation’s strategy, operating environment or risk profile changes significantly. Aligning the review with annual strategic planning keeps appetite and objectives set together.

Put Your Appetite to Work. Clew is a risk and assurance platform built around the Golden Thread, so the appetite you set at the top becomes the line every risk, control and indicator below it is measured against. Risk and assurance teams in government, healthcare, construction, infrastructure and utilities, mining and resources, and transport use Clew to link their risks and indicators back to the objectives they protect. Find out how mature your approach is with the free risk maturity assessment, or explore Clew’s risk management software.

Related Resources

Keith Ricketts-Clew Risk Software

Meet the author

Keith Ricketts

VP Of Marketing

25 years with global software vendors in Cyber Security, Risk and ERP. Blends strategic marketing, agility and a proven record of results.
Connect on LinkedIn

In this article

How mature is your risk management?

Take the free assessment and get a personalised report in minutes.
Take the assessment